Filmy szkoleniowe dla oprogramowania do pomiarów Metric

Poniżej znajdują się filmy szkoleniowe dla oprogramowania pomiarowego Metric. Sekcja "A" zawiera filmy dotyczące ustawień, kalibracji i innych ważnych zastosowań, takich jak połączenie systemów pomiarowych w połączeniu z krzyżowymi stopniami pomiarowymi i interfejsem. Pozostałe sekcje "B" do "G" pokazują funkcje pomiarowe i zastosowania z nakładką DXF. W sekcji "H" przedstawiono funkcje referencyjne i przesyłanie danych pomiarowych do programu Excel. Filmik w sekcji "I" dotyczy w szczególności tworzenia stosów zdjęć w Metric. Należy pamiętać, że w zależności od wersji Metric, której używasz, nie wszystkie wymienione tu filmy będą dla Ciebie istotne. Metric PE zawiera ograniczoną liczbę funkcji (patrz lista funkcji). Aby uzyskać dostęp do filmów należy podać hasło. Prosimy o przesłanie krótkiego e-maila, a chętnie prześlemy Państwu dane dostępowe do filmów z oprogramowaniem pomiarowym Metric.

A	Settings	Size	Filetype	Creationdate
A-01	Calibrate PIN 0.5mm	112.28	mp4	2017/11/15
A-02	Calibration manual	8.51	mp4	2017/12/11
A-03	Correction of measuring results	9.16	mp4	2007/03/26
A-04	Create calibration protocol	38.22	mp4	2020/01/31
A-05	Find Metric.opt in Virtual Store	4.88	mp4	2020/01/31
A-06	Pixel lens	11.35	mp4	2019/06/10
A-07	Rename measuring systems	2.36	mp4	2007/03/26
A-08	Setting hot keys	40.88	mp4	2017/12/15
A-09	Set up IBR Interfaces	7.11	mp4	2007/05/23
A-10	Set up measuring systems	2.73	mp4	2007/03/26
A-11	Switch OPT1 of OPT2	66.45	mp4	2017/11/15
A-12	Tolerance rings on hotkeys	141.06	mp4	2019/06/10
A-13	Tolerance rings setup	232.20	mp4	2019/06/10
A-14	U-Eye settings	13.57	mp4	2010/01/13
A-15	Changing linear system from Metric to Inch	111.94	mp4	2020/02/08
A-16	Change measure system from Metric to Inch	76.57	mp4	2020/02/08
A-17	Correct conectivity of measuring systems	95.19	mp4	2020/02/07
A-18	Show hidden files (Virtual Store)	7.89	mp4	2020/02/07
A-19	Interpolate measuring systems with DC32 Steinwald	82.54	mp4	2020/04/04
A-20	Renaming of measuring axes	44.04	mp4	2020/03/16

	Measuring Functions
B	Distance measuring	Size	Filetype	Creationdate
B-01	Distance	11.92	mp4	2019/05/28
B-02	Distance between angles XY size	5.34	mp4	2017/08/21
B-03	Distance CC	7.36	mp4	2017/08/21
B-04	Distance circle	7.80	mp4	2017/08/21
B-05	Distance line to line automatic	8.41	mp4	2017/12/03
B-06	Distance line to line - SU 3	21.36	mp4	2019/06/18
B-07	Distance line to line highest point automatic	16.95	mp4	2017/12/03
B-08	Distance point to line automatic	9.20	mp4	2017/12/03
B-09	Line to line	34.66	mp4	2017/08/09
B-10	Point and distance construction	10.53	mp4	2017/08/23
B-11	Multipoint line (automatic)	4.69	mp4	2017/08/21
B-12	Change distance measuring to XY size	27.48	mp4	2020/03/16

C	Angle measuring	Size	Filetype	Creationdate
C-01	A-Measure and Z-Measure	6.95	mp4	2017/08/23
C-02	Angle 3P and 4P	8.48	mp4	2017/08/21
C-03	Angle 3P and 4P (automatic)	5.94	mp4	2017/08/21

D	Diameter and radius measuring	Size	Filetype	Creationdate
D-01	Diameter and radius (automatic)	3.91	mp4	2017/08/21
D-02	Diameter radius diameter LSC	8.59	mp4	2017/08/21
D-03	Radius freehand circle - circle segment - Radius (preset)	8.12	mp4	2017/08/23
D-04	Free hand circle	39.12	mp4	2020/03/16

E	DXF Overlay DXF construction and measuring	Size	Filetype	Creationdate
E-01	Construct to DXF	16.47	mp4	2017/08/23
E-02	Measure to DXF	17.00	mp4	2017/08/23
E-03	AutoCAD-EN	5.38	mp4	2014/06/12
E-04	Load and save on DXF window 48	53.64	mp4	2020/03/18
E-05	Load DXF part 1	87.90	mp4	2020/03/18
E-06	Load DXF part 2	46.30	mp4	2020/03/19

F	Special measuring functions	Size	Filetype	Creationdate
F-01	Area	10.52	mp4	2017/08/21
F-02	Center displacement (multi)	4.75	mp4	2017/08/21

G	Tool measuring functions	Size	Filetype	Creationdate
G-01	Angle 4 C (simple automatic)	42.31	mp4	2017/08/21
G-02	Angle 4 C (simple manuel)	57.85	mp4	2017/08/21
G-03	Angle in circle	91.92	mp4	2019/05/28
G-04	Chamfer length XY size	8.30	mp4	2017/08/09
G-05	Chisel edge angle 1	56.29	mp4	2017/08/09
G-06	Chisel edge angle	36.96	mp4	2017/08/09
G-07	Clearance angle 1	58.17	mp4	2017/08/09
G-08	Clearance angle axial half sharp angle	47.76	mp4	2017/08/23
G-09	Clearance angle half point angle axial	61.60	mp4	2017/12/03
G-10	Clearance angle I plus cutting angle	79.32	mp4	2017/08/09
G-11	Clearance angle II	65.09	mp4	2017/08/09
G-12	Clearance angle plus cutting angle	87.77	mp4	2017/08/09
G-13	Cutting angle	69.22	mp4	2017/08/09
G-14	Distance ahead Center	116.04	mp4	2018/11/02
G-15	Distance PP (help circle)	49.81	mp4	2017/08/09
G-16	Distance PP plus angle	67.07	mp4	2017/08/09
G-17	Flank diameter automatic	19.06	mp4	2017/08/10
G-18	Flank diameter manuel	11.90	mp4	2017/08/10
G-19	Hair cross single and rotatable	10.77	mp4	2017/08/09
G-20	Lead-in chamfer	12.73	mp4	2017/08/10
G-21	Measure RC	48.50	mp4	2017/08/09
G-22	Object analysis diameter and area automatic	28.82	mp4	2017/12/11
G-23	Object analysis diameter and area manuel	20.66	mp4	2017/12/11
G-24	Object analysis x-y extension automatic	38.81	mp4	2017/12/11
G-25	Object analysis x-y extension manuel	33.43	mp4	2017/12/11
G-26	Pitch	8.66	mp4	2017/08/10
G-27	Pitch angle and base radius	14.42	mp4	2017/08/10
G-28	Pitch geometrie automatic	24.25	mp4	2017/08/10
G-29	Radius plus difference (180deg)	56.27	mp4	2017/08/23
G-30	Radius plus difference (variable)	67.32	mp4	2017/08/23
G-31	Rollomatic funktion point angle	7.49	mp4	2017/12/03
G-32	Rollomatic measure function	32.76	mp4	2017/08/09
G-33	Step Drill	28.70	mp4	2018/11/02
G-34	Step Drill (no tip)	32.49	mp4	2018/12/01

H	Reference functions	Size	Filetype	Creationdate
H-01	Create text in images	122.99	mp4	2019/06/18
H-02	Excel protocol keywords inline	24.04	mp4	2019/06/10
H-03	Standard Excel protocol	103.91	mp4	2020/01/27
H-04	Individual Excel protocol	96.85	mp4	2020/01/27
H-05	Metric without generation Excel protocol	115.52	mp4	2020/01/27
H-06	Multipicture Excel protocol	138.81	mp4	2020/01/30
H-07	Multipicture Excel protocol line by line	163.23	mp4	2020/01/30
H-08	Create measuring protocol as PDF	193.23	mp4	2020/01/30

I	Special functions	Size	Filetype	Creationdate
I-01	Focus stacking	95.72	mp4	2020/02/08