ISO 9001:2015 - ISO 14001:2015 - ISO 37301:2021 - ISO 37001:2018 - SA 8000:2014 - ECOVADIS
Go to wishlist Wishlist

Shopping cart

Your cart is currently empty

Training videos for Metric measurement software

Below you will find the training videos for the Metric measurement software. Section "A" contains the videos for settings, calibration and other important applications such as the interconnection of measuring systems in connection with cross measuring stages and interface. The other sections "B" to "G" show measurement functions and applications with DXF overlay. Section "H" shows reference functions and the transfer of measurement data to Excel. The video in section "I" is especially for the creation of picture stacks in the Metric. Please note that depending on the Metric version you are using, not all of the videos listed here will be relevant to you. Metric PE contains a limited number of functions (see function list). To access the videos you need a password. Please send us a short e-mail and we will gladly send you the access data for the videos of the Metric measuring software.

A Settings Size  Filetype Creationdate
A-01 Calibrate PIN 0.5mm 112.28 mp4 2017/11/15
A-02 Calibration manual 8.51 mp4 2017/12/11
A-03 Correction of measuring results 9.16 mp4 2007/03/26
A-04 Create calibration protocol 38.22 mp4 2020/01/31
A-05 Find Metric.opt in Virtual Store 4.88 mp4 2020/01/31
A-06 Pixel lens 11.35 mp4 2019/06/10
A-07 Rename measuring systems 2.36 mp4 2007/03/26
A-08 Setting hot keys 40.88 mp4 2017/12/15
A-09 Set up IBR Interfaces 7.11 mp4 2007/05/23
A-10 Set up measuring systems 2.73 mp4 2007/03/26
A-11 Switch OPT1 of OPT2 66.45 mp4 2017/11/15
A-12 Tolerance rings on hotkeys 141.06 mp4 2019/06/10
A-13 Tolerance rings setup 232.20 mp4 2019/06/10
A-14 U-Eye settings 13.57 mp4 2010/01/13
A-15 Changing linear system from Metric to Inch 111.94 mp4 2020/02/08
A-16 Change measure system from Metric to Inch 76.57 mp4 2020/02/08
A-17 Correct conectivity of measuring systems 95.19 mp4 2020/02/07
A-18 Show hidden files (Virtual Store) 7.89 mp4 2020/02/07
A-19 Interpolate measuring systems with DC32 Steinwald 82.54 mp4 2020/04/04
A-20 Renaming of measuring axes 44.04 mp4 2020/03/16
  Measuring Functions      
B Distance measuring Size  Filetype Creationdate
B-01 Distance 11.92 mp4 2019/05/28
B-02 Distance between angles XY size 5.34 mp4 2017/08/21
B-03 Distance CC 7.36 mp4 2017/08/21
B-04 Distance circle 7.80 mp4 2017/08/21
B-05 Distance line to line automatic 8.41 mp4 2017/12/03
B-06 Distance line to line - SU 3 21.36 mp4 2019/06/18
B-07 Distance line to line highest point automatic 16.95 mp4 2017/12/03
B-08 Distance point to line automatic 9.20 mp4 2017/12/03
B-09 Line to line 34.66 mp4 2017/08/09
B-10 Point and distance construction 10.53 mp4 2017/08/23
B-11 Multipoint line (automatic) 4.69 mp4 2017/08/21
B-12 Change distance measuring to XY size 27.48 mp4 2020/03/16
C Angle measuring Size  Filetype Creationdate
C-01 A-Measure and Z-Measure 6.95 mp4 2017/08/23
C-02 Angle 3P and 4P 8.48 mp4 2017/08/21
C-03 Angle 3P and 4P (automatic) 5.94 mp4 2017/08/21
D Diameter and radius measuring Size  Filetype Creationdate
D-01 Diameter and radius (automatic) 3.91 mp4 2017/08/21
D-02 Diameter radius diameter LSC 8.59 mp4 2017/08/21
D-03 Radius freehand circle - circle segment - Radius (preset) 8.12 mp4 2017/08/23
D-04 Free hand circle 39.12 mp4 2020/03/16
E DXF Overlay
DXF construction and measuring		 Size  Filetype Creationdate
E-01 Construct to DXF 16.47 mp4 2017/08/23
E-02 Measure to DXF 17.00 mp4 2017/08/23
E-03 AutoCAD-EN 5.38 mp4 2014/06/12
E-04 Load and save on DXF window 48 53.64 mp4 2020/03/18
E-05 Load DXF part 1 87.90 mp4 2020/03/18
E-06 Load DXF part 2 46.30 mp4 2020/03/19
F Special measuring functions Size  Filetype Creationdate
F-01 Area 10.52 mp4 2017/08/21
F-02 Center displacement (multi) 4.75 mp4 2017/08/21
G Tool measuring functions Size  Filetype Creationdate
G-01 Angle 4 C (simple automatic) 42.31 mp4 2017/08/21
G-02 Angle 4 C (simple manuel) 57.85 mp4 2017/08/21
G-03 Angle in circle 91.92 mp4 2019/05/28
G-04 Chamfer length XY size 8.30 mp4 2017/08/09
G-05 Chisel edge angle 1 56.29 mp4 2017/08/09
G-06 Chisel edge angle 36.96 mp4 2017/08/09
G-07 Clearance angle 1 58.17 mp4 2017/08/09
G-08 Clearance angle axial half sharp angle 47.76 mp4 2017/08/23
G-09 Clearance angle half point angle axial 61.60 mp4 2017/12/03
G-10 Clearance angle I plus cutting angle 79.32 mp4 2017/08/09
G-11 Clearance angle II 65.09 mp4 2017/08/09
G-12 Clearance angle plus cutting angle 87.77 mp4 2017/08/09
G-13 Cutting angle 69.22 mp4 2017/08/09
G-14 Distance ahead Center 116.04 mp4 2018/11/02
G-15 Distance PP (help circle) 49.81 mp4 2017/08/09
G-16 Distance PP plus angle 67.07 mp4 2017/08/09
G-17 Flank diameter automatic 19.06 mp4 2017/08/10
G-18 Flank diameter manuel 11.90 mp4 2017/08/10
G-19 Hair cross single and rotatable 10.77 mp4 2017/08/09
G-20 Lead-in chamfer 12.73 mp4 2017/08/10
G-21 Measure RC 48.50 mp4 2017/08/09
G-22 Object analysis diameter and area automatic 28.82 mp4 2017/12/11
G-23 Object analysis diameter and area manuel 20.66 mp4 2017/12/11
G-24 Object analysis x-y extension automatic 38.81 mp4 2017/12/11
G-25 Object analysis x-y extension manuel 33.43 mp4 2017/12/11
G-26 Pitch 8.66 mp4 2017/08/10
G-27 Pitch angle and base radius 14.42 mp4 2017/08/10
G-28 Pitch geometrie automatic 24.25 mp4 2017/08/10
G-29 Radius plus difference (180deg) 56.27 mp4 2017/08/23
G-30 Radius plus difference (variable) 67.32 mp4 2017/08/23
G-31 Rollomatic funktion point angle 7.49 mp4 2017/12/03
G-32 Rollomatic measure function 32.76 mp4 2017/08/09
G-33 Step Drill 28.70 mp4 2018/11/02
G-34 Step Drill (no tip) 32.49 mp4 2018/12/01
H Reference functions Size  Filetype Creationdate
H-01 Create text in images 122.99 mp4 2019/06/18
H-02 Excel protocol keywords inline 24.04 mp4 2019/06/10
H-03 Standard Excel protocol 103.91 mp4 2020/01/27
H-04 Individual Excel protocol 96.85 mp4 2020/01/27
H-05 Metric without generation Excel protocol 115.52 mp4 2020/01/27
H-06 Multipicture Excel protocol 138.81 mp4 2020/01/30
H-07 Multipicture Excel protocol line by line 163.23 mp4 2020/01/30
H-08 Create measuring protocol as PDF 193.23 mp4 2020/01/30
I Special functions Size  Filetype Creationdate
I-01 Focus stacking 95.72 mp4 2020/02/08