Ihr Warenkorb ist momentan leer
Nachstehend finden Sie die Schulungsvideos für die Messsoftware Metric. In Sektion "A" sind die Videos für die Einstellungen, Kalibration und weitere wichtige Anwendungen wie z. B. die Verschaltung von Messsystemen in Verbindung mit Kreuzmesstischen und Interface enthalten. In den weiteren Sektionen "B" bis "G" sind Messfunktionen sowie Anwendungen mit DXF Overlay dargestellt. Die Sektion "H" zeigt Referenzfunktionen sowie die Übertragung der Messdaten in Excel. Das Video in Sektion "I" ist speziell für die Erstellung von Bilderstapeln (picture stacking) in der Metric. Bitte beachten Sie, dass je nach der Metric Version, die Sie im Einsatz haben, nicht alle der hier aufgeführten Videos für Sie relevant sind. Die Metric PE enthält eine begrenzte Anzahl an Funktionen (siehe Funktionsliste). Für den Zugriff auf die Videos benötigen Sie ein Passswort. Bitte senden Sie uns ein kurzes E-Mail und wir senden Ihnen gerne die Zugangsdaten für die Videos der Metric Messsoftware zu.
| A | Settings | Size | Filetype | Creationdate |
| A-01 | Calibrate PIN 0.5mm | 112.28 | mp4 | 2017/11/15 |
| A-02 | Calibration manual | 8.51 | mp4 | 2017/12/11 |
| A-03 | Correction of measuring results | 9.16 | mp4 | 2007/03/26 |
| A-04 | Create calibration protocol | 38.22 | mp4 | 2020/01/31 |
| A-05 | Find Metric.opt in Virtual Store | 4.88 | mp4 | 2020/01/31 |
| A-06 | Pixel lens | 11.35 | mp4 | 2019/06/10 |
| A-07 | Rename measuring systems | 2.36 | mp4 | 2007/03/26 |
| A-08 | Setting hot keys | 40.88 | mp4 | 2017/12/15 |
| A-09 | Set up IBR Interfaces | 7.11 | mp4 | 2007/05/23 |
| A-10 | Set up measuring systems | 2.73 | mp4 | 2007/03/26 |
| A-11 | Switch OPT1 of OPT2 | 66.45 | mp4 | 2017/11/15 |
| A-12 | Tolerance rings on hotkeys | 141.06 | mp4 | 2019/06/10 |
| A-13 | Tolerance rings setup | 232.20 | mp4 | 2019/06/10 |
| A-14 | U-Eye settings | 13.57 | mp4 | 2010/01/13 |
| A-15 | Changing linear system from Metric to Inch | 111.94 | mp4 | 2020/02/08 |
| A-16 | Change measure system from Metric to Inch | 76.57 | mp4 | 2020/02/08 |
| A-17 | Correct conectivity of measuring systems | 95.19 | mp4 | 2020/02/07 |
| A-18 | Show hidden files (Virtual Store) | 7.89 | mp4 | 2020/02/07 |
| A-19 | Interpolate measuring systems with DC32 Steinwald | 82.54 | mp4 | 2020/04/04 |
| A-20 | Renaming of measuring axes | 44.04 | mp4 | 2020/03/16 |
| Measuring Functions | ||||
| B | Distance measuring | Size | Filetype | Creationdate |
| B-01 | Distance | 11.92 | mp4 | 2019/05/28 |
| B-02 | Distance between angles XY size | 5.34 | mp4 | 2017/08/21 |
| B-03 | Distance CC | 7.36 | mp4 | 2017/08/21 |
| B-04 | Distance circle | 7.80 | mp4 | 2017/08/21 |
| B-05 | Distance line to line automatic | 8.41 | mp4 | 2017/12/03 |
| B-06 | Distance line to line - SU 3 | 21.36 | mp4 | 2019/06/18 |
| B-07 | Distance line to line highest point automatic | 16.95 | mp4 | 2017/12/03 |
| B-08 | Distance point to line automatic | 9.20 | mp4 | 2017/12/03 |
| B-09 | Line to line | 34.66 | mp4 | 2017/08/09 |
| B-10 | Point and distance construction | 10.53 | mp4 | 2017/08/23 |
| B-11 | Multipoint line (automatic) | 4.69 | mp4 | 2017/08/21 |
| B-12 | Change distance measuring to XY size | 27.48 | mp4 | 2020/03/16 |
| C | Angle measuring | Size | Filetype | Creationdate |
| C-01 | A-Measure and Z-Measure | 6.95 | mp4 | 2017/08/23 |
| C-02 | Angle 3P and 4P | 8.48 | mp4 | 2017/08/21 |
| C-03 | Angle 3P and 4P (automatic) | 5.94 | mp4 | 2017/08/21 |
| D | Diameter and radius measuring | Size | Filetype | Creationdate |
| D-01 | Diameter and radius (automatic) | 3.91 | mp4 | 2017/08/21 |
| D-02 | Diameter radius diameter LSC | 8.59 | mp4 | 2017/08/21 |
| D-03 | Radius freehand circle - circle segment - Radius (preset) | 8.12 | mp4 | 2017/08/23 |
| D-04 | Free hand circle | 39.12 | mp4 | 2020/03/16 |
| E | DXF Overlay DXF construction and measuring |
Size | Filetype | Creationdate |
| E-01 | Construct to DXF | 16.47 | mp4 | 2017/08/23 |
| E-02 | Measure to DXF | 17.00 | mp4 | 2017/08/23 |
| E-03 | AutoCAD-EN | 5.38 | mp4 | 2014/06/12 |
| E-04 | Load and save on DXF window 48 | 53.64 | mp4 | 2020/03/18 |
| E-05 | Load DXF part 1 | 87.90 | mp4 | 2020/03/18 |
| E-06 | Load DXF part 2 | 46.30 | mp4 | 2020/03/19 |
| F | Special measuring functions | Size | Filetype | Creationdate |
| F-01 | Area | 10.52 | mp4 | 2017/08/21 |
| F-02 | Center displacement (multi) | 4.75 | mp4 | 2017/08/21 |
| G | Tool measuring functions | Size | Filetype | Creationdate |
| G-01 | Angle 4 C (simple automatic) | 42.31 | mp4 | 2017/08/21 |
| G-02 | Angle 4 C (simple manuel) | 57.85 | mp4 | 2017/08/21 |
| G-03 | Angle in circle | 91.92 | mp4 | 2019/05/28 |
| G-04 | Chamfer length XY size | 8.30 | mp4 | 2017/08/09 |
| G-05 | Chisel edge angle 1 | 56.29 | mp4 | 2017/08/09 |
| G-06 | Chisel edge angle | 36.96 | mp4 | 2017/08/09 |
| G-07 | Clearance angle 1 | 58.17 | mp4 | 2017/08/09 |
| G-08 | Clearance angle axial half sharp angle | 47.76 | mp4 | 2017/08/23 |
| G-09 | Clearance angle half point angle axial | 61.60 | mp4 | 2017/12/03 |
| G-10 | Clearance angle I plus cutting angle | 79.32 | mp4 | 2017/08/09 |
| G-11 | Clearance angle II | 65.09 | mp4 | 2017/08/09 |
| G-12 | Clearance angle plus cutting angle | 87.77 | mp4 | 2017/08/09 |
| G-13 | Cutting angle | 69.22 | mp4 | 2017/08/09 |
| G-14 | Distance ahead Center | 116.04 | mp4 | 2018/11/02 |
| G-15 | Distance PP (help circle) | 49.81 | mp4 | 2017/08/09 |
| G-16 | Distance PP plus angle | 67.07 | mp4 | 2017/08/09 |
| G-17 | Flank diameter automatic | 19.06 | mp4 | 2017/08/10 |
| G-18 | Flank diameter manuel | 11.90 | mp4 | 2017/08/10 |
| G-19 | Hair cross single and rotatable | 10.77 | mp4 | 2017/08/09 |
| G-20 | Lead-in chamfer | 12.73 | mp4 | 2017/08/10 |
| G-21 | Measure RC | 48.50 | mp4 | 2017/08/09 |
| G-22 | Object analysis diameter and area automatic | 28.82 | mp4 | 2017/12/11 |
| G-23 | Object analysis diameter and area manuel | 20.66 | mp4 | 2017/12/11 |
| G-24 | Object analysis x-y extension automatic | 38.81 | mp4 | 2017/12/11 |
| G-25 | Object analysis x-y extension manuel | 33.43 | mp4 | 2017/12/11 |
| G-26 | Pitch | 8.66 | mp4 | 2017/08/10 |
| G-27 | Pitch angle and base radius | 14.42 | mp4 | 2017/08/10 |
| G-28 | Pitch geometrie automatic | 24.25 | mp4 | 2017/08/10 |
| G-29 | Radius plus difference (180deg) | 56.27 | mp4 | 2017/08/23 |
| G-30 | Radius plus difference (variable) | 67.32 | mp4 | 2017/08/23 |
| G-31 | Rollomatic funktion point angle | 7.49 | mp4 | 2017/12/03 |
| G-32 | Rollomatic measure function | 32.76 | mp4 | 2017/08/09 |
| G-33 | Step Drill | 28.70 | mp4 | 2018/11/02 |
| G-34 | Step Drill (no tip) | 32.49 | mp4 | 2018/12/01 |
| H | Reference functions | Size | Filetype | Creationdate |
| H-01 | Create text in images | 122.99 | mp4 | 2019/06/18 |
| H-02 | Excel protocol keywords inline | 24.04 | mp4 | 2019/06/10 |
| H-03 | Standard Excel protocol | 103.91 | mp4 | 2020/01/27 |
| H-04 | Individual Excel protocol | 96.85 | mp4 | 2020/01/27 |
| H-05 | Metric without generation Excel protocol | 115.52 | mp4 | 2020/01/27 |
| H-06 | Multipicture Excel protocol | 138.81 | mp4 | 2020/01/30 |
| H-07 | Multipicture Excel protocol line by line | 163.23 | mp4 | 2020/01/30 |
| H-08 | Create measuring protocol as PDF | 193.23 | mp4 | 2020/01/30 |
| I | Special functions | Size | Filetype | Creationdate |
| I-01 | Focus stacking | 95.72 | mp4 | 2020/02/08 |